Easy DIY Printable Christmas Ornaments

These easy DIY printable Christmas ornaments are such a pretty and inexpensive way to dress up your tree! Use the printable designs provided or customize your own.

Seasonal Simplicity Christmas Series

Welcome back to week 2 of the Seasonal Simplicity Christmas Series! Each week we’re sharing a variety of Christmas projects to help inspire you for the season. From home decor and crafts to seasonal recipes and gift ideas – there’s something for everyone! Last week we showed you our favorite DIY Christmas projects and this week we have lots of fun ideas for creating your own DIY Christmas ornaments. You can find all of the ornaments at the end of the post, so be sure to check them out!

Easy DIY Printable Christmas Ornaments

I always make at least one handmade ornament for our tree each year. They’re fun to create and I always enjoy looking back at ornaments years’ past – especially those that the kids helped out with. If you’re looking to make some Christmas ornaments of your own, these printable Christmas ornaments are an easy and inexpensive way to dress up your Christmas tree or other Christmas decor.

This post contains affiliate links. This means that I may make a small commission from items purchased directly through the link provided. Thanks so much for your support!

DIY Printable Christmas Ornaments Tutorial

These DIY printable Christmas ornaments are super easy to make and just require a few basic supplies. I created 4 different printable designs that you can use, but you can always customize them with any printables you’d like. I made 2 of each design for our 9 foot tree and love the look!

Materials

jumbo popsicle sticks {5/8 inch width}
wood stain {these stain wipes are quick and easy if you don’t have stain on hand}
white cardstock
paper cutter
baker’s twine {or other thin ribbon or string}
double sided craft tape or other adhesive
tin snips or sharp scissors
sandpaper

Directions

Download and print out the ornament printables onto white cardstock {or choose whatever printables you would like}. Trim to approximately 3.5×5 inches.

Cut the popsicle sticks so they are just slightly longer than the width of the printables. I used tin snips for this but sharp scissors will also work. You may need to lightly sand the edges. Stain the pieces front and back and allow to dry.

Using double sided tape, adhere the popsicle sticks to the front of the printables along the top and bottom edges.
Cut twine to desired length and adhere to the back of the ornament using double sided tape.Press down firmly. {NOTE: Make sure the twine or ribbon you’re using is quite thin. Otherwise, it will be too thick to adhere the popsicle stick when you go to finish off the back.}